7 ft x 30" Axle Scale with Ramps KeyPad Indicator Printer Scoreboard 60,000 lb
Prime USA Scales Axle Scale 60,000 lb capacity industrial-duty. Complete with twin weighing platforms, digital indicator, indicator stand, optional anchor bolts and all required cables and cords. Engineered to operate in common outdoor environments. Factory calibrated. Ships ready to place into location, bolt on ramps available, connect cables and put into use. 

The PS series scale provides very economical high-capacity weighing of trucks, and is easily set up in a wide variety of locations. Typical application of this scale is for verification that trucks and trailers are not underloaded or overloaded. Includes step-by-step set up instructions. Can be set up on site in less than an 30 mins. 

Super-Duty Weighing Platforms Weighing platforms are rated to 200% of capacity. Ramps are easily secured to platforms with single-bolt tabs. Fully epoxy coated surfaces throughout. Also available in four platform and six platform configurations. Full-feature Digital Indicator The high performance 7600E digital indicator offers simple operation and a wide array of optional features. Operates on standard 110 VAC power.

Features: 

  • Used to minimize risk of overweight fines and ensure trucks are not
  • underloaded for maximum productivity
  • Large weighing surface and low profile for vehicle weighing
  • Heavy duty I-Beam construction with threaded top plate
  • Four premium water tight alloy steel nickel plated load cells
  • Low profile 5.75” height for smooth drive on/off
  • Load cell capacity is 2.2 times the scale capacity for overload protection
  • 50’ quick connecting cables (2) for hostile environments
  • Can be used with ramps for above ground installations or flush with
  • concrete for a pit installed permanent application
  • Durable platform with treading for tire grip
  • Powder coated yellow paint finish
  • Florklift portable
  • Factory Calibrated 
  • Overload Protection

Indicator Information:

From tare entry to counting to check weighing, OP-905 is the ideal choice for any industrial applications. A full numeric keypad allows tare entry directly from the keypad for weighing the contents of totes, cylinders, and containers, eliminating the need to scroll and toggle tare weight values. A count mode allows keyed piece count and APW (average piece weight). The OP-905 indicator is encased in a tough, all stainless steel NEMA 4X/IP67 enclosure for extra-long life, even in the harshest conditions. The ultra-bright, oversized display reduces operator error and accelerates productivity. Fully interactive, it features three RS-232 and one RS-485 communication ports and one USB port as well as complete EDP and print ticket programmability.

 

FEATURES:

  • Eleven-button operation with full numeric keypad 
  • Stainless steel washdown enclosure with U-bracket mount
  • Large bright Light Emitting Diode (LED) display
  • Gross/Net, tare, piece count, check weighing, records memory
  • Programmable print format
  • Time and date

  • Multiple weighing units: (lb/kg)

  • Gross/Tare/Pre-Set Tare/Zero

  • Multiple Hold functions

  • Count weighing

  • Accumulation weighing

  • Check weighing

  • Overload / Underload indication 

  • Connects to printer

  • Splash proof keyboard and display

  • Connects to a Remote Display/Scoreboard

  • Power saving mode

  • Can connect to a PC or printer for data logging (optional)

  • 20 mm Letter LED display

  • Rechargeable battery

  • RS232 output

We strive for 100% Feedback! 
WHY BUY FROM US? We offer a quality built product at a reasonable price. We specialize in scales and nothing else. We offer sales, service, and calibration in the largest cities throughout the United States. We stand behind our products and have a knowledgeable staff ready to help with any questions. We manufacture American made products, build custom scales, and offer only the best quality. 
?
Payment
Shipping
Returns


We accept the following forms of payment: Visa, Mastercard, American Express, Discover, and Paypal. Please contact us with any questions on payments???????.


Large scale items will ship via LTL freight and require shipping to a business address with forklift or loading dock. Smaller items will ship with UPS or FedEx. Prime USA Scales provides tracking information in 24-48 hours on most orders. You will receive a walk through email keeping you abreast of your payment, shipment, and delivery confirmation. Please contact with any questions. We appreciate your business.


Returns are accepted 30 days after the purchase. Shipping will be paid both ways by buyer for returns. If you purchased with free shipping your return amount will have shipping deducted from your refund. A 10% restocking fee may be applied to your return based on if item is used or new. Any questions regarding returns please contact customer service through messages. We want every customer 100% satisfied with their purchase.

© Copyright 2018  Prime Scales USA- All Rights Reserved
Prime USA Scales Axle Scale 60,000 lb capacity industrial-duty. Complete with twin weighing platforms, digital indicator, indicator stand, optional anchor bolts and all required cables and cords. Engineered to operate in common outdoor environments. Factory calibrated. Ships ready to place into location, bolt on ramps available, connect cables and put into use. The PS series scale provides very economical high-capacity weighing of trucks, and is easily set up in a wide variety of locations. Typical application of this scale is for verification that trucks and trailers are not underloaded or overloaded. Includes step-by-step set up instructions. Can be set up on site in less than an 30 mins. Super-Duty Weighing Platforms Weighing platforms are rated to 200% of capacity. Ramps are easily secured to platforms with single-bolt tabs. Fully epoxy coated surfaces throughout. Also available in four platform and six platform configurations. Full-feature Digital Indicator The high performance 7600E digital indicator offers simple operation and a wide array of optional features. Operates on standard 110 VAC power. Features: ---Used to minimize risk of overweight fines and ensure trucks are not ---underloaded for maximum productivity ---Large weighing surface and low profile for vehicle weighing ---Heavy duty I-Beam construction with threaded top plate ---Four premium water tight alloy steel nickel plated load cells ---Low profile 5.75” height for smooth drive on/off ---Load cell capacity is 2.2 times the scale capacity for overload protection ---50’ quick connecting cables (2) for hostile environments ---Can be used with ramps for above ground installations or flush with ---concrete for a pit installed permanent application ---Durable platform with treading for tire grip ---Powder coated yellow paint finish ---Florklift portable ---Factory Calibrated ---Overload Protection Indicator Information: From tare entry to counting to check weighing, OP-905 is the ideal choice for any industrial applications. A full numeric keypad allows tare entry directly from the keypad for weighing the contents of totes, cylinders, and containers, eliminating the need to scroll and toggle tare weight values. A count mode allows keyed piece count and APW (average piece weight). The OP-905 indicator is encased in a tough, all stainless steel NEMA 4X/IP67 enclosure for extra-long life, even in the harshest conditions. The ultra-bright, oversized display reduces operator error and accelerates productivity. Fully interactive, it features three RS-232 and one RS-485 communication ports and one USB port as well as complete EDP and print ticket programmability. FEATURES: ---Eleven-button operation with full numeric keypad ---Stainless steel washdown enclosure with U-bracket mount ---Large bright Light Emitting Diode (LED) display ---Gross/Net, tare, piece count, check weighing, records memory ---Programmable print format ---Time and date Multiple weighing units: (lb/kg) Gross/Tare/Pre-Set Tare/Zero Multiple Hold functions Count weighing Accumulation weighing Check weighing Overload / Underload indication Connects to printer Splash proof keyboard and display Connects to a Remote Display/Scoreboard Power saving mode Can connect to a PC or printer for data logging (optional) 20 mm Letter LED display Rechargeable battery RS232 output We strive for 100% Feedback! WHY BUY FROM US? We offer a quality built product at a reasonable price. We specialize in scales and nothing else. We offer sales, service, and calibration in the largest cities throughout the United States. We stand behind our products and have a knowledgeable staff ready to help with any questions. We manufacture American made products, build custom scales, and
(description exceeds maximum possible length)