{C}

{C}

 Acrylic Heat Bending Machine

Attention

1. Machine should be placed in dry, clean, ventilated position, the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives.

2. For safety reasons, must be connected to a reliable safety grounding device must have three feet with ground connection.

3. The heating process leads to high temperature, so avoid contacting the heating area with fingers or skin.

4. Unplug the power cable/cord, if the machine will not be used in a long time.
Description

The acrylic bending machine heater is the core part of  bending machine. You can assemble various kinds of ideal  practical acrylic bender with this heater. 
•  Processing Material: Acrylic, Plastic, PVC, Plexiglass.

•  Used for: 
 This acrylic bending machine heater can be widely used in  decoration engineering, sign making, display cabinet,  aquarium wrapping, lighting LED channel letter, bending the  supermarket shelves, curtain wall, large light box, acrylic  plates and plastic plates.
•  The acrylic bending machine heater can bend all kinds of  plastic sheet. If the thickness of acrylic sheet is beyond  6mm, you can use two heaters heat the top and bottom of the  sheet at the same time, or you need to cut a slot on the  sheet. 
•  You can also use many acrylic bender heaters to heat more  bents at the same time.
Parameter
Voltage 110V
Frequency 50/60Hz
Power 300W/800W/1500W/2000W

Maximum Bending Width

 12in(300mm)24in.(600mm)48in(1220mm)71in(1800mm)

Heating Thickness

 0.04" – 0.24" (1mm - 6mm)
Package Type Cardboard Box
Feature & Advantage

• Reasonable design, small size, compact structure  and beautiful appearance.
• Heat even and temperature adjustable.
• With circulating cooling water system on both sides of heating pipe.
• Power supply joint and water pipe joint are at the same end.
• The body is made of special aluminum extrusions.

• Portable, small  occupation, low consumption and reliable operation.
• Light and practical with low cost, value-priced.
• Circulating cooling water system can make sure other parts (no heating is  required) won’t get thermal deformation.
• Free plugging and unplugging, easy to storage and assembles to worktable very  conveniently.

Recommended temperature for some regular materials:

Acrylic: 210?

Perspex: 195?

PVC sheet: 155?

ABS: 190?

PET: 160?

NOTE: Just for reference, and users may modify them according to their materials and working habits.
 Installation and Operation
 Customer Real Show

Package Content

1 X Acrylic PVC Bending Machine Heater

1 X Water Pump

1 X Temperature Controller

1 X Water Thermometer