Right Angle Gearhead Motor Assembly
Mfr: KAG Kahlig Antriebstechnik GmbH
Mfr P/N: M48x60/I+SN22,6+IGM12/2
Package of One Motor per Order Specs: Overall Assembly Dimensions: 7-3/4" (L) x 2-7/8" (W) x 2" (H) Measured Output RPM with No Load: 3 Volt DC - 62 RPM / 24 Volt DC - 540 RPM Brushed DC Motor with Permanent Magnet • Ball bearings • 11 Inch wire leads with 2-pin molex connector • Closed zinc-plated housing with zinc-die-cast bearing flanges • Direction of rotation CW / CCW (Depending on polarity of voltage applied to motor) • Power output in rated operation: 51.8 Watt • Torque: 15 N-cm • Rated: 3300 RPM @ 24 Volt DC • Rated Voltage: 24 Volt DC (Will work from 3-24 Volt DC) Right Angle Worm Gear • Suitable for left or right rotation • Gear Reduction: 7:1 • 429 RPM Output when Motor is at 3000 RPM (24 Volt DC) • Continous Torque 75 N-cm • Output shaft has timing pulley with 14 teeth pinned to shaft for belt about 5/8" width • Output shaft about 5/16" diameter x 1" Long Touchless and Wear Resistant Magnetic Incremental Encoder • This encoder supply symmetric amplitude in addiction of supply voltage • Open Collector output • Integrate Pull-Up Resistors • Supply voltage 5-24 Volt DC, Output current 20mA max • 12 Impluses per revolution • 2 Channel • Four 11 Inch wire leads with 5-pin molex connector KAG Kahlig Antriebstechnik GmbH Motor: M48x60/I Gearhead: SN22.6 Magnetic Encoder: IGM12/2 |