Complementary
| Maximum mechanical speed |
6000 rpm |
| [Us] rated supply voltage |
115...480 V |
| Network number of phases |
Three phase |
| Continuous stall current |
4.8 A |
| Continuous stall torque |
5.8 N.m at 115...480 V three phase |
| Continuous power |
1900 W |
| Peak stall torque |
18.3 N.m at 115...480 V three phase |
| Nominal output power |
580 W at 115 V single phase
1090 W at 230 V single phase
1930 W at 400 V three phase
2210 W at 480 V three phase |
| Nominal torque |
5.5 N.m at 115 V single phase
5.2 N.m at 230 V single phase
4.6 N.m at 400 V three phase
4.4 N.m at 480 V three phase |
| Nominal speed |
1000 rpm at 115 V single phase
2000 rpm at 230 V single phase
4000 rpm at 400 V three phase
4800 rpm at 480 V three phase |
| Maximum current Irms |
17.1 A |
| Shaft end |
Smooth shaft |
| Shaft diameter |
19 mm |
| Shaft length |
40 mm |
| IP degree of protection |
IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5
IP65 motor: conforming to EN/IEC 60034-5
IP65 shaft bushing: conforming to EN/IEC 60034-5 |
| Encoder type |
Absolute multiturn SinCos Hiperface |
| Speed feedback resolution |
128 periods |
| Holding brake |
Without |
| Mounting support |
International standard flange |
| Motor flange size |
100 mm |
| Electrical connection |
Rotatable right angled connector |
| Torque constant |
1.21 N.m/A at 120 °C |
| Back emf constant |
77 V/krpm at 20 °C |
| Number of motor poles |
4 |
| Rotor inertia |
2.31 kg.cm² |
| Stator resistance |
2.4 Ohm |
| Stator inductance |
19.5 mH |
| Maximum radial force Fr |
990 N at 1000 rpm
790 N at 2000 rpm
690 N at 3000 rpm
620 N at 4000 rpm |
| maximum axial force Fa |
160 N |
| Type of cooling |
Natural convection |
| Length |
204.5 mm |
| Centring collar diameter |
95 mm |
| Centring collar depth |
3.5 mm |
| Number of mounting holes |
4 |
| Mounting holes diameter |
9.0 mm |
| Circle diameter of the mounting holes |
115 mm |
| Net weight |
5.8 kg |