|
25mm Electric Rebar Bending Bender 110V |
|
|
| Product Overview |
| The rebar bender machine can bend 1/4''(#2) to 1"(#8) (6 to 25 mm) rebar to 0-180°in 6-7 seconds. Two standard foot pedal control switches for hands-free bending.It is widely used in construction engineering, used to bend round steel, rebar, screw and so on, the machine can be batch operation.Built-in safety device can stop operation immediately. |
| Product Parameters |
| Model: | RB-25 |
| Voltage: | AC110V 50/60Hz |
| Power: | 1700W |
| Bending Angle: | 0-180° |
| Max.Rebar Diameter: | 0.98"(25mm #8 Grade 60) |
| Min.Rebar Diameter: | 0.24"(6mm #2 Grade 60) |
| Bending Speed: | 6-7 Seconds |
| Max.Rebar Hardness: | HRC30 |
| Bending Radius: | 1.53"(39mm) |
| Gyre idler wheel diameter: | 3.70"(94mm) |
| Noise: | 92db |
| Shell Material: | Iron |
| Amps: | 14A |
| Product size: | 17.9"*20.5"*17.5"(45.5cm*52cm*44.5cm) |
| Net weight: | 200.6lb(91kg) |
| Gross weight: | 284lb(129kg) |
| NOTE:When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally. | |
| Product Features & Advantages |
 |
 |
 |
 |
| - 1700W high-power pure copper coil motor,
smooth operation, low noise, long life, higher work efficiency. - Ultra-Fast bending speed, can complete a steel bar bending in 6-7 seconds, save time. - The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. - This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. - Foot switch design, convenient and efficient bending. With four handles on the corner for you to transport and operate effortlessly. |
| Product Presentation & Details |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Item Included(056605) |
| Rebar bending machine *1 | Foot switch *2 | English instruction manual *1 |