More than just a pretty speaker, the Dayton Audio Designer Series DSA115-8
4" woofer features an extremely neutral response and high Xmax capability.
Key Features
Cosmetic frame with low profile lip, designed for front mounting—no
countersinking required!
Low distortion motor system with copper shorting ring
Black anodized aluminum cone, half roll rubber surround for durability and
accurate reproduction
Smooth frequency response and linear roll-off simplify filter design
Vented pole piece for minimized power compression and maximized
reliability
Retains the same "family look" as the popular Dayton Audio DVC Series
subwoofers and passive radiators
Generous Xmax capability encourages use of moderate bass boost to tailor
the response
The Designer Series by Dayton Audio was developed specifically with the
speaker designer in mind. It is an affordable, attractive line of drivers that
puts performance first. Careful engineering ensures that each speaker in the
series is capable of handling full rated power at the lowest possible
frequencies — without exceeding Xmax.
These speakers combine useful performance parameters with elegant style.
Carefully optimized to provide superb audio reproduction when incorporated into
a wide variety of enclosures and alignments, the Designer Series transducers put
a beautiful face on audiophile excellence.
Product Specifications
Nominal Diameter 4"
Moving Mass Of Diaphragm (Mmd) 6.7
Power Handling (RMS) 35 Watts
Power Handling (MAX) 70 Watts
Impedance 8Ω
Frequency Response 63 to 11,000Hz
Sensitivity 86.1dB 2.83V/1m
Voice Coil Diameter 1"
Thiele-Small Parameters
Resonant Frequency (Fs) 63.25Hz
DC Resistance (Re) 5.9Ω
Voice Coil Inductance (Le) 0.63mH
Mechanical Q (Qms) 2
Electromagnetic Q (Qes) 0.53
Total Q (Qts) 0.42
Compliance Equivalent Volume (Vas) 0.14ft³
Mechanical Compliance of Suspension (Cms) 0.94mm/N
BL Product (BL) 5.44T·m
Maximum Linear Excursion (Xmax) 4.1mm
Surface Area of Cone (Sd) 54.1cm²
Materials of Construction
Cone Material Aluminum
Surround Material Rubber
Voice Coil Wire Material Copper
Voice Coil Former Aluminum
Basket / Frame Material Steel
Magnet Material Ferrite
Mounting Information
Overall Outside Diameter 4.55"
Baffle Cutout Diameter 3.69"
Depth 2.15"
# Mounting Holes 4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity
suggestion)
Sealed Volume 0.05ft³
Sealed F3 119Hz
Vented Volume 0.14ft³
Vented F3 62Hz