How does it work?
Features:
Terms used in this listing:
Grid: When we refer to the grid, we are referring to the transmission system for electricity in America. Specifically, residential/commercial 120VAC/1PH/60HZ connections. This product includes a pure sine 48-62HZ grid tie inverter. It may work in other countries such as Canada, Mexico, South America, and Europe, but it has not been tested in these regions.
Gridless Revolution does not make any claims or guarantees regarding power sent back to the grid or a reduced electric bill. Sending power back to the grid is different with every electric provider. In most cases, the relatively small amount of power “sent back” to the grid will in fact be consumed within the same residence, thus, never actually be sent to the grid. Meaning, your electric bill should go down. If you intend to sell power back to your electric provider, you must contact them as there are many rules and regulations and Gridless Revolution cannot be responsible for knowing all the regulations in every jurisdiction.
Battery chemistry compatibility: |
Deep Cycle Lead Acid Flooded Lead Acid Sealed Lead Acid (SLA) Absorbed Glass Mat (AGM) Gel Lithium Lithium Iron Phosphate (LiFePO4) 3S or 7S lithium |
Solar charge controller technology: |
Off-grid inverter: MPPT Grid-tied inverter: MPPT |
Solar panel requirement: Open circuit voltage range (VOC rating on your solar panel label): |
12V version: 15-28V DC |
24V version: 22-60V DC |
|
Maximum solar panel input power: (Let us know if you need more solar input capacity) |
40A / 550W @ 12V 40A / 1100W @ 24V |
Solar charge controller power consumption at idle: |
1.0W |
Grid-tied inverter power output: |
600W max continuous Pure sine wave |
Off-grid inverter power output: |
500W max continuous / 1000W max surge Modified sine wave |
Input ports: |
(1) Solar panel connector pair (1) 12V/24V Pair input/output 5/16” post terminals for connecting external batteries or devices |
Output ports: |
(2) Household 110/120VAC/1PH/60HZ 3-prong outlet (1) 12V socket, 30A (360W max output) (1) 12V/24V Pair input/output 3/8” post terminals for connecting external batteries or devices |
Output port technology: |
(1) USB-C PD & (1) USB-A QC 3.0: 18W Max. Output Power (5V@3.4A, 9V@2A, 12V@1.5A) · Supports DCP (BC1.2, Apple, Samsung) · Supports Qualcomm Quick Charge Protocol QC2.0 and QC3.0 · Supports Samsung Fast Charge Protocol AFC (1) USB-A 5V 2.0A |
Grid power requirement: |
90-140VAC (Typ 110-125 VAC), automatically detected Typical 48-62Hz, automatically detected |
Temperature range: |
-4°F~131°F (-20°C~55°C) |
Enclosure inside dimensions: |
14”L x 7-1/8”W x 9-5/8”H |
Outside dimensions: |
17.6" L x 10.0" W x 10.7" H |
Weight: |
18 lbs |
Warranty: |
Complete solar generator: 1 year Solar charge controller: 3 years Lithium Battery (If equipped): 3 years |