Round hole switch mould: 7.2*11.5cm

Screw: 6*6.4mm

Material: Silicone+Electroplating paint

Color: transparent

Two-hole switch mould: 11.8*12cm

Size (approx.):Single hole switch mould:7.4*11.8cm

Moulding way:

First pour the resin or other casting material into a measuring cup and stir slowly to release air bubbles.

Add glitter, dried flowers, resin paints or other decorative items into it if you want.

Pour the material into the mould and continue to stir slowly.

Wait 24 hours, until the material in the mold is completely solidified, then the mold can be demolded.

Package includes:

4 x Light switch cover resin mould

20 x Screws

Note:

Slight size error may exist due to manual measurement.

Slight color difference may exist due to different screens.

Don't use a torch and heat drier to release bubbles while resin in the mould, or the heat will break the mould.

Round hole switch mould: 7.2*11.5cm

Screw: 6*6.4mm

Material: Silicone+Electroplating paint

Color: transparent

Two-hole switch mould: 11.8*12cm

Size (approx.):Single hole switch mould:7.4*11.8cm

Moulding way:

First pour the resin or other casting material into a measuring cup and stir slowly to release air bubbles.

Add glitter, dried flowers, resin paints or other decorative items into it if you want.

Pour the material into the mould and continue to stir slowly.

Wait 24 hours, until the material in the mold is completely solidified, then the mold can be demolded.

Package includes:

4 x Light switch cover resin mould

20 x Screws

Note:

Slight size error may exist due to manual measurement.

Slight color difference may exist due to different screens.

Don't use a torch and heat drier to release bubbles while resin in the mould, or the heat will break the mould.