Double Transfer Switch With Automatic Changeover For Municipal Electricity, Ups, Specification:
Item Type: Dual Power Automatic Transfer Switch
Product Model: NLQ4-125/4P
Switch Type: Secondary power distribution
Rated Current: 100A
Rated Voltage: 400V AC
Insulation Voltage: 690V AC
Rated Frequency: 50Hz/60Hz
Electrical Grade: PC grade isolation type
Service Life: Electrical: 2000 Times; Mechanical: 5000 Times
Rated Short Circuit Current: 50kA
SCPD (fuse): RT16-00-63A
Rated Impulse Withstand Voltage: 8kV
Control Circuit:
Rated Control Voltage Us: AC220 V 50Hz
Normal Working Condition: 85% Us-110% Us
Auxiliary Circuit: 2 Independent relays, each relay includes 2 sets of transformer contacts
Contact Capacity: AC220V 50Hz
Touch Time: <50ms
Operation Transition Time: <50ms
Return Time: <50ms
Off Time: <50ms
Package List:
1 x Dual Power Automatic Transfer Switch
Note:
1. The maximum ambient temperature should not exceed 40℃, the minimum should not be lower than ‑5℃, and the average temperature within 24 hours should not be higher than 35℃.
2. The altitude of the installation site should not be higher than 2000meter.
3. When the maximum temperature reaches 40℃, the relative humidity of the installation site should not exceed 50%; when the temperature is the lowest temperature of ‑5℃, the relative humidity is higher, for example, if the temperature is 25℃, the relative humidity is 90%. Special measures should be taken to deal with occasional condensation on product surfaces due to temperature changes.
4. During conversion, the internal switch will lose the coil in the control circuit. The coil can work normally at 85%‑110% of the rated working voltage. If the voltage in the coil is too low, it may cause the coil to heat up or burn out. Product Features- SCOPE OF STANDBY POWER SUPPLY APPLICATION: This product is a photovoltaic version of the dual power supply automatic transfer switch, unlike the municipal power product can only be applied to the utility or generator, this product can be applied to UPS, inverter, solar, photovoltaic as a standby -Power supply can be connected. The product has passed CE certification and can be used with confidence.
- INSTALLATION SIZE: The dual power transfer switch adopts 35mm DIN rail installation design and comes with a buckle. The height of this switch is 76mm, which may not be suitable for some standard rail installation junction box. Please pay attention to the size of the junction box before purchasing, to avoid the junction box cannot be closed normally.
- FAST SWITCHING: The switch switching response time is ≤0.05(S), and the power supply is switched in milliseconds to ensure the continuity, reliability and safety of the power supply. Note that automatic switching is only possible when the emergency power supply is already on, manual switching is required if the backup power supply is not on.
- TECHNICAL PARAMETERS: The cross-sectional area of the connectable cable: ≤16mm²; Rated control voltage Us: AC220 V 50Hz; Rated current: 100A; Rated voltage: 400V AC; Insulation voltage: 690V AC; Rated frequency: 50Hz/60Hz; Rated short-circuit current: 50kA; Rated surge voltage: 8kV; Service life: electric: 2000 times; mechanical: 5000 times.
- FLAME RETARDANT MATERIAL: made of high quality flame retardant plastic, with good insulation, high temperature resistance, aging resistance, safe and reliable. The use of silver contacts can greatly improve the conductivity and service life of the product.
Shipping: Shipping is complimentary within the lower 48 US States. - We Do Not Ship to PO/APO Boxes, HI or Alaska
- We Do Not Ship Outside of the Continental US
- All items ship within 24-72 hours of Payment
- For large items that require Freight shipping a valid phone number is required to call and schedule your delivery
Terms of Sale and Feedback: - Feedback is extremely important to us and
- If you are satisfied with our transaction, please take a moment to leave Positive Feedback. YOUR Satisfaction is our #1 Priority!
- If there are any issues, PLEASE contact us BEFORE leaving a neutral or negative rating so that we may resolve any concerns.
- We PROMISE we can make you happy if you give us a fair chance.
Returns / Concerns: - All items qualify for returns within 14 - 30 days of receipt. Buyer is responsible for return shipping on any item that is not damaged
- Please be sure this is an item you want before making your purchase. Customer Satisfaction is our TOP priority!
- All items are IN STOCK at time of listing.
- Inventory changes constantly and it is impossible to maintain a perfectly accurate count of all items.
- Please do not penalize us if we have to issue you a refund!
Thank You For Your Business! |