3528 2835 2 Pin 8Mm LED Strip Connector - DIY Strip to Wire Quick Solderless Connection for 12V 24V Single Color Led Strip Lights (Pack of 20)
Description
| Light Source Type | LED |
| Style | Modern |
| Number of Items | 20 |
| Power Source | DC |
| Number of Light Sources | 1 |
| Control Method | Remote |
| Light Direction | Adjustable |
| Batteries Included? | No |
| Assembled Height | 0.3 centimeters |
| Batteries Required? | No |
| Product Dimensions | 0.79 x 0.43 x 0.12 inches |
| Material | Plastic |
| Assembled Width | 1.1 centimeters |
| Included Components | 20pcs Strip to Wire Connectors (BL20B-8) |
| Item dimensions L x W x H | 0.79 x 0.43 x 0.12 inches |
| Indoor/Outdoor Usage | Indoor |
| Light Color | White |
| Item Weight | 0.634 ounces |
| Assembled Length | 2 centimeters |
| Special Features | strip to wire connectors |
| Special Feature | strip to wire connectors |
| Switch Installation Type | Surface mount |
| Color | White |
| Wattage | 48 watts |
| Shape | rectangle |
| Voltage | 24 Volts |
| Shade Material | Plastic |
| Manufacturer | Alightings |
| Brand | Biantie La |
- CONNECT TAPE TO WIRE - No soldering, quick and flexible connection. The 2 pin Led Strip Connector suitable for 8mm width SMD 3528 2835 3014 5630 single color LED light strip. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip.
- NOT PICKY ABOUT WIRES - Work for 24awg, 22awg, 20awg, 18awg solid wire, stranded wire and fused wire etc. Only need to press the stripped wire into the slot to firmly connect and conduct. It avoids the dilemma that other connectors can't pierce the wires or can't be turned on or difficult to reuse.
- SUPPORT UP TO 6A CURRENT CARRYING - Compatible with 5v, 12v, 24v led strips, allow you to connect longer LED strips by one LED connector. DIY led strip to wire connection length you want, no mater strip-to-wire extension or strip-to-strip jumper, free from the limit of terminal position
- COMPATIBLE WITH WATERPROOF STRIPS - Should peel off covered silicon on the surface around soldering line area, if you want to connect WATERPROOF LED strip light.
- MONEY-BACK - The led light strip connectors are sold with a full 30 days money-back. If you're unsatisfied with this item for any reason, we'll refund your purchase price immediately.
Product Description
- DIY Strip to Wire Quick Connection Updated version of LED strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. compatible with 30-90 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.
- Suitable for a variety of wire sizes Stripping-free connectors usually have strict requirements on the wires, such as the standard wire 20 awg, 18 gauge can be well matched, and it is difficult to open again after closing. These Biantie La LED strip connector improves these shortcomings, 22 - 20awg standard or non-standard solid wire can be applied. not only can be firmly clamped, but also easy to open and reuse.
How to choose the appropriate connector
1. Determine the light strip type
- Color, width, and waterproof rating of strips are the key points to choosing a appropriate connector. It doesn't have much to do with whether the chips of your light strip is 3528 or 5050.
2. Choose the right connector according to your needs
DIY Strip to wire connetor22awg,20awg standard or non-standard solid wire can be applied. not only can be firmly clamped, but also easy to open and reuse | Solid Strip to wire connectorHave strict requirements on the wires, such as the standard wire 20 awg can be well matched, and it is difficult to open again after closing. | Ordinary connector with pigtailFixed wire length, less load current. |
How to use the strip to wire connector
| 1. Open the wire clip. | 2. Use a fingernail to press the two wires into the slot. | 3. Insert your 8mm LED light strip inside the clip underneath the two contact prongs, making sure the + and - symbols align. | 4. Snap the wire clip shut. Pull on the wire to confirm you've secured the wires inside the connector. |
A few tips:
- Cut the conductors to a length that is long enough to run through the clamps and make sure the cable insulation enters the connector housing to its stop point as pressure lugs grip the insulation when the locking catch is snapped down over the cables and this securely holds the cables and minimises the chance of the falling out.
- After wiring, always check polarity/terminal orientation matches the light strip, otherwise it won't illuminate.
- Standard solid core wiring is recommended. For thinner non-standard stranded wiring, doubling up the exposed conductors increases thickness for tighter clamping and greater contact area.
ABOUT US
We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.
SHIPPING
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.
RETURNS
We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
CUSTOMER SATISFACTION
We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.