4 Preset Channels

You can store up to four sets of temperature setting into the four preset channels, so you don’t have to constantly adjust temperature settings for works different in temperature requirement.

How it works: You can set the Channel 1 to 380°C for big solder joints; Channel 2 to for 350 for general purpose soldering; Channel 3 to for 330°C for temperature-sensitive boards, Channel 4 to 400°C for wire splicing. While you’re working, you can switch between these settings with just ONE press of a button. (Temperature settings for reference only, use your preferred temperature for respective applications)

Sleep Mode

When the station detects no movement for the soldering iron for longer than 5/10/15/20/30 minutes, the station will enter sleep mode to extend the lifespan of the soldering iron tip & heating element, and conserve energy. How it works: As compared to heating up from room temperature, idling at 392°F can effectively prevent the soldering iron tip from accelerated oxidization while retaining sufficient heat to get up to operating temperature in a much quicker rate.

°C-°F Conversion

You can easily toggle the station’s display temperature from Fahrenheit (°F) to Celsius (°C). This way, you can follow tutorials and match temperature settings without the complicated calculations.

Temperature Adjustment

You can adjust the temperature from 392°F to 896°F intuitively via our adjustment dial. This digital dial provides 1 increment with clicking feedback per adjustment, as compared to conventional potentiometer dials, you can adjust to your desired temperature precisely without fiddling with the knob front and back.