Youxmoto 700022 HVAC Blower Motor Assembly with Fan Cage 2003-2014 Ford E150, fit for E150 Econoline and E250 1997-2002, fit for E250 Econoline 2003-2014, fit for E350 Club Wagon 1997-2002
Item Description

About this item

  • Fits the Following Vehicles: The heater blower motor fit for Ford E150 2003-2014 , 2003-2005 for Ford E150 Club Wagon, 1997-2002 for Ford E150 Econoline Ford E150 Econoline Club Wagon Ford E250, 2003-2014 for Ford E250 Econoline, 1997-2002 for Ford E350 Club Wagon, 2003-2005 for Ford E350 Econoline Club Wagon, 1999-2014 for Ford E350 Super Duty
  • Replace part number: Interchange Part Number of HVAC Blower Motor Group Assembly, XC2Z-19805-BA, 700022, FO3126109, 330-58014-000, 615-00603, FOTZ 18504 A, XC2Z 19805 BA
  • Effect of blower motor: The blower consists of a speed-adjustable DC motor and a squirrel-cage fan that blows air through the heater core and heats it into the vehicle. By adjusting the speed of the motor, the amount of air supplied to the cabin can be adjusted.
  • Advantage of Blower Motor: Wind power strong and No noise. Adopt new technology and excellent production equipment to make products more environmentally friendly and energy-saving.
  • Every Blower Motor must take inspected and tested multiple times before the shipment.
*The AC Blower Motor is responsible for producing air that goes through the vents of your vehicle's AC and heating system.
*If your AC or Heater does not produce or circulate any heated or cooled air then you may have a problem with your blower motor.
*Step up from the ordinary, It is time to replace the blower motor that has stopped running.
*When you replace the blower motor, it is recommended to replace the new blower motor resistor.
*Please use the year/make/model drop down bar confirm the compatibility before purchasing.

Weak airflow for both the heating and cooled air coming out of the vent
No air pushing through the vents (motor broken down or bad control module)
Unusual blower noise such as a rattle or squeak (worn motor or bad bearings)
If you have an overheating blower motor, would be a burning smell coming from your air vents
Material of rotor punching plate is silicon steel sheet,avoid burning of motor
-When you replace the blower motor, it is recommended to replace the new blower motor resistor.
-Please use the year/make/model drop down bar confirm the compatibility before purchasing.
1.Remove the screws under the passenger side dashboard of the vehicle.
3.Disconnect the blower motor electrical connector.
5.Compare the new blower motor to the old one to verify that you have the correct part.
6.Install the new blower motor into the box and tighten the screws.
8.After the installation is complete, turn on the air conditioner and check if it is running normally.

Payment
We accept payment only through PAYPAL

Shipping
We ship products worldwide through standard express courier service, it will reach within 7 to 10 days to abroad buyers, we ship the product after recieved clear payment and give full information about shipment to the buyer
Return
We accept product return 25 days from delivery date but product should be in original condition.