85Am,110V/220V Dual Voltage, CNC Plasma Cutter Machine, 1 Inch Cutting Thickness
Specification
| Item model number | STC850P MAX |
| Item Package Quantity | 1 |
| Batteries Required? | No |
| Power Source | ac |
| Color | Yellow |
| Product Dimensions | 14.2 x 12.4 x 20.2 inches |
| Material | Plasma Cutting Torch, Plasma Cutter |
| Country of Origin | China |
| Item Weight | 37.8 pounds |
| Model | STC850P MAX |
| Manufacturer | SILATU |
| Included Components | Electronic |
12.4 inches x 14.2 inches x 20.2 inches. Weight: 37.8 lb
Item Description
- CNC Function: The SILATU plasma cutter is equipped with blow-back technology and a Non-HF (non-high frequency) pilot arc, which are compatible with CNC systems. This setup minimizes the risk of high-frequency signal interference, thereby improving cutting stability. The non-contact blow-back pilot arc initiation ensures that the arc starts without the need for physical contact with the metal. The machine features two connection ports: a 2-pin connector for arc voltage output at 1:1 ratio and 5-pin connector for signal control. This design facilitates seamless integration with CNC cutting tables.
- Cutting Thickness:This Non-HF pilot arc plasma cutter from SILATU includes an automatic voltage detection system that works with both 110V and 220V inputs, operating on a single-phase power supply with a 60% duty cycle. It is optimized for cutting materials up to 12mm thick at 40A on 110V with 45 PSI air pressure, and up to 30mm thick at 85A on 220V with 70 PSI. For electrical safety, it requires a big current circuit breaker for 110V operation and a 50A breaker for 220V. The versatility of this SILATU plasma cutter makes it suitable for a wide range of materials, including stainless steel, alloy steel, mild steel, copper, aluminum, etc.
- Digital Screen Display:The SILATU CNC plasma cutter's digital display panel provides a centralized view of key parameters such as air pressure, voltage, and current. This allows operators to monitor the machine's status in real-time and make adjustments as needed, enhancing operational efficiency. In the event that the blow-back plasma cutter does not function properly, the screen offers an error code system to assist in troubleshooting and identifying issues quickly.
- Air Sensor Technology:An integrated air sensor displays the air pressure on the machine's front panel. Users can manually adjust the air pressure using the air regulator, as automatic adjustment is not available. An air filter is installed at the rear of the unit, featuring a quick-connect 1/4 NPT air fitting for easy setup. When connected to an air compressor, the recommended air pressure should be set to around 65 PSI, with a flow rate of approximately 250 liters per minute.
- PT/2T/4T/PA Function:The post-flow cooling time, adjustable between 3 and 15 seconds, extend the life of the torch head and consumables. The 2T mode offers semi-automatic control over the torch trigger, whereas the 4T mode enables fully automatic triggering, freeing the operator's hand. The PA setting adjusts the duration of the pilot arc. Additionally, the SILATU plasma cutter model STC850P MAX incorporates a mesh cutting mode designed to prevent arc interruption when cutting mesh materials.
- CNC CUTTING TORCH: Under the CNC function, we recommend using a straight torch, which is an optional accessory and not a standard component. The straight torch offers greater convenience, although it comes at a higher cost. We recommend either the PTM80 or the PTM60 models. Of course, the handheld cutting torch that comes with the machine can also be used with the CNC system, it just needs to be securely fastened
Product Description
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.