COMPLETE VIPER REMOTE STARTER SYSTEM

ALL PLUG-IN INSTALLATION—NOTHING ADDITIONAL NEEDED

When the temperature drops or the summer heat soars, there's nothing better than stepping into a preheated or precooled interior...

Whether your Ford Explorer is exposed to extreme weather conditions or you're simply looking for added comfort and convenience, a remote starter from our specialty line of vehicle-specific remote starters designed for Ford Explorers will deliver the ease of installation and the features & performance you want every time. Guaranteed.

This specific remote starter kit is made for all
2016 through 2019 Ford Explorer's
with Flip-Key Ignitions Only.

An all-digital system that provides an almost effortless DIY installation using just a single Y-connector that simply plugs in right under your driver's side dash, totally eliminating the need for any wire tapping, cutting, or splicing, keeping your vehicle's OEM wiring intact.

After plugging in the system, a simple system activation procedure is done just by turning the vehicle's ignition ON & OFF. No key programming procedures, never any computers or special programmers involved.

After you activate the system, your next step is to program the remotes to the control module using the remote programming button on the system's antenna. And that's about it.

SEE INSTALLATION ILLUSTRATION IN PHOTOS

Go straight from delivery to installation.

Step-by-Step Installation Guide & Video

Standard System Features Include:

• Activation is achieved by press & holding the remote's button for 3 seconds.
  
  
• 15-Minute Remote Start Run Time: The engine will shut down automatically after 15 minutes.
  
  
• Active Remote Shut-Down: You can cancel the remote starter sooner the same way you activated it.
  
  
• Active Key-Takeover: The remote starter will not immediately shut down when the driver's door is opened.
  
  
• Automatically engages the vehicle's climate controls based on prior settings.
  
  
• Activates OEM autolights while running.
  
  
• BONUS FEATURE! In addition to activating the remote starter, the system's remotes can also lock and unlock your vehicle's doors. Press & release the remote's button 1 time to lock, 2 times to unlock.
  
  
• System includes two 1-button remote transmitters.
  
  
• Viper D-series remotes upgradable: Decide later that you would like even more range or 2-way notification; this system can easily be upgraded any time after installation with any of Viper's digital series remote packages.
  
  

Standard SAE Safety & Security Features Include:

• This system is equipped with the same OEM safety and operating restrictions as Ford's factory installed remote starters: The system will detect any current or stored fault codes and will prevent the remote starter from activating. If the hood is open, the transmission is not in park, the vehicle's battery voltage is too low, the check engine light is on, or any stored DTC codes (no visual lights on the dash) will prevent the system from activating (you can also consult your vehicle's owners/operators manual).
  
  
• Entrance protection and safety: In addition, on most Ford vehicle's, depending on how the OEM ECM was configured, it will only allow key takeover to be performed within an allotted amount of time after entering the vehicle. This time span can range from 1 to 4 minutes before the engine will shut down if the key takeover has not been performed (you can also consult your vehicle's owners/operators manual).
  
  
• Fail-Safe Design: In any instance of a system failure, the system cannot prevent you from starting the vehicle normally with a key.
  
  
• This system cannot be activated by your factory remotes.
  
  

Standard Warranty & Support:

• Limited 1-Year QC Warranty: Though it's highly unlikely you would ever need warranty service for one of our systems, and we are so sure of it that in the unlikely event that it happens, once one of our tech's determines the problem, we will send you out the replacement within 48 hours with a prepaid return shipping package for the part we are replacing, at no expense to you; all your shipping costs are covered under your warranty. Warranty begins from date of delivery. MCA must be contacted directly for all support and warranty assistance.
  
  
• Unlimited Tech Support is available by phone, email, and through our website's Live Chat 7 days a week. Contact information will be provided on every page of your installation guide and on your receipt.
  
  
• Still have questions? No problem. We have technicians on call 7 days a week. Just "Contact Seller" above with any technical questions you may have. Replies are commonly made within the hour between the hours of 8am-8pm Eastern, 7 days a week.
  
  
• Tech Tip: Lite experience in DIY automotive aftermarket accessories is recommended. A DIY remote starter is not for everybody and should always be installed by a knowledgeable individual with the right tools and dexterity to get the job done properly and efficiently.
  
  
• This system does not arrive in any type of retail packaging. This system is not available over-the-counter in retail stores. It is designed and assembled by our professional installers for the DIY installer. All components provided are made by DEI/Viper. Y-harness is made in-house here at MCA.
  
  
• MotorCityAutobahn is your fastest route to remote starter installation, providing vehicle-specific ready systems online since 2002.