We are proud to say that ALL of our products and the raw materials used in them, are... MADE IN THE USA
And our molds are designed and manufactured in Florida by us!
MAKE GIANT FIELDSTONE ROCKS FOR PENNIES EACH WITH THIS MOLD.
AND FOR A LIMITED TIME YOU GET FREE SHIPPING!
MAKE REAL-LOOKING STONE VENEER FOR WALLS, STEPPING STONES,
OR AS PAVERS WITH THESE MOLDS...
WE SHOW YOU HOW!
YOU ARE PURCHASING ONE #GS-2432-2, GIANT 24"x32"x2" THICK, "OLDE APPALACHIAN FIELDSTONE" CONCRETE MOLD. (Totals 5.3 +/- Sq. Ft. of area covered). This mold is illustrated in photo #1 of this listing. The remaining mold photos are of other mold designs in our "Giant Fieldstone Mold" series of molds. Note the 12" ruler in each photo to give you a gauge to go by and to illustrate how big these stones are. And remember... we are now offering FREE SHIPPING within the Continental USA on these stone molds!
You can make custom-colored, heavy, medium, or lightweight stones with them. Make thick stepping stones, wall veneer, or thinner stone for walls, counter tops, or flooring... Depending on the thickness you pour them. This particular mold is a nominal 2" thick, but we also have deeper molds to make thicker stones.
WANT MORE THAN JUST ONE OF THESE GIANT MOLDS?
ORDER 3 GIANT FIELDSTONE MOLDS... GET 1 MORE MOLD OF YOUR CHOICE FREE!
ORDER 6 MOLDS... GET 2 MORE MOLDS FREE!
ORDER 9 MOLDS... GET 3 FREE!
AND YOU GET FREE SHIPPING WITHIN THE CONTINENTAL USA!
THERE ARE 12 DIFFERENT AND UNIQUE GIANT FIELDSTONE MOLD SIZES AVAILABLE.
Here are the nominal sizes in inches, and each is a different shape:
20x29x2 - 23x33x2 - 24x28x3 - 24x30x2 - 24x30x3 - 24x31x2 - 24x31x3 - 24x32x2 - 24x32x3 - 25x30x2 - 25x32x2 - 25x33x2
You can see each mold number in the photos above by moving your curser over the picture of each. Click the photo first.
TO DETERMINE THE SIZE MOLD (AND STONE) YOU ARE VIEWING, OUR MOLD NUMBERING SYSTEM IS AS FOLLOWS:
The "GS" stands for "Giant Stone". The next four numbers are the nominal size of the mold/stone. And the last number (after the dash), is the depth of the mold at the deepest point, which equates to the thickness of the stone made. So GS-2432-2 is a mold that is 24"x32"x2". Remember that you can pour the stones thinner to save on concrete, or to make a thinner "wall veneer" stone.
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
HERE'S HOW
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete per instructions… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour the mix into the molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so covered with plastic to hold in the moisture, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.
We are currently working on a video to illustrate the demolding process of these giants and other large molds, as they can be very heavy and not easy to handle. We will be including the Free video with each purchase once it is completed.
MAKE THESE GIANT STONES FOR AS LITTLE AS $0.35 - $0.65 A SQUARE FOOT! AND YOU CAN START NEXT WEEK!
Complete FREE instructions on how to make the stone are included!
We also make many other sizes of Olde Appalachian Fieldstone molds that are approximately 1-1/2" to 2-1/2" thick, and will blend with these perfectly for walls, walks, etc.
Either order this Free Molds offer from our eStore, or email us Shop@Oldeworld.com
should you have any questions.
These molds are made with .093, high-impact, commercial, rubberized ABS plastic, for flexibility and long life, and can be used hundreds of times if cared for properly. This is not our normal .060 ABS. This is mainly due to the mold size and weight when made. They require a much thicker and heavier ABS to make the stones that you can be proud of... and to last through hundreds of pours.
Interested in starting your own business?
Become an "Olde World Stone & Tile" Producer!
Since 1992, we've trained hundreds of entrepreneurs worldwide in how to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore and Oldeworld websites, or if you have questions, feel free to email or phone us.
