Product introduction: This product after years of engineering installation and customer feedback.repeatedly was improved,and using the latest international technology,and the output stability,high precision,small volume,light weight,elegant appearance,unique design,And get it now allows you to use at ease of access control power supply. Any entrance guard controller,as long as you have it,all problems can be solved.also can be used as the power supply of other equipment,such as alarm,monitoring,etc. Functions and Features: 1.The input voltage AC100V-260V,frequency 50-60HZ. 2.Good isolation,high and low voltage 1500V AC/1 minutes without breakdown. 3.The output voltage adjustable DC11.5V-13.5V(suits Wiring is far,to make the electric lock does not work,at this time can put the high voltage adjustable),Output current 5A. 4.The ripple voltage up 50mv or less. 5.A short circuit(flow) protection(output circuit is short circuit will automatically disconnect,when troubleshooting will automatically return to normal.)Overheating,over-voltage protection. 6.The battery reverse polarity protection(battery leads only to burn the fuse,not damage the power supply.) 7.1A charging current,charging when the battery voltage to 13.5V,the full stop charging,have LED to charge power indicator. 4 hours with 12V/7Ah battery. 8.Battery over discharge protection(in the process of the battery when the battery voltage is lower than 9.5V,automatically disconnect the battery,in order to protect the data loss of access control machine and the caller can quick charge). 9.The mains and battery switch time of 10ms, is really the uninterrupted power supply. 10.Equipped with battery starting button B(pictured),convenient installation test. 11.There can choose wireless module install to use remote control function,open the door for 0 to 15s, converient equipped with remote control the open the door.electric lock output set NC,NO,it can be adapted to any electric lock.(The wireless module and remote item ID:251321660688,261266875945) 12.The CONTROL is a set of active signal input(DC5-24V) and internal isolation,can pick up at the same time more than one entrance guard controller and the communication. 13.Connect ports: NO/NC/COM/+12V/GND/PUSH1/PUSH2/CONTROL/ BATTERY BACK UP +/- 14.Operative device: E/M Lock, Access Controller, Exit Push Button and so on... 14.Weight 0.3KG/Size 130 x 72 x 40mm. Matters needing attention: This product can't be installed in the dampness or rain can pour into place,should be in a ventilated and dry place. Two red line for AC100-260V input,the input voltage can't beyond this range,yellow green line must be reliable grounding. Organic glass live parts for high pressure parts,non-professional personnel shall not be opened without authorization.wire shall not be arbitrarily or with a screwdriver to touch component parts. More can't be charged maintenance. When installing the battery should identify the corresponding fork"red and black"line. Package Included: 1 x Access Control Power Supply 1 x English Manual Shipping:
Payment
Refunds & Returns
|