SPECIAL LIMITED TIME OFFER!!!
FREE SHIPPING!!!
YOU SAVE $20!!!
Are you ready to smoke the ball?
The LEFT HANDED ADOBE IRON SET is finally HERE!
Compares to "expensive name brand golf clubs that we cannot mention"
GREAT NEW GOLF CLUBS FOR THE BEGINNING TO ADVANCE GOLFER!!WITH A RETAIL VALUE OF $599.99
BUY IT TODAY!
SPECIAL Limited Time OFFER!
8 CUSTOM GOLF CLUBS for a FRACTION of the cost of name brand golf clubs!!!
The LEFT HANDED ADOBE irons have a lower, deeper center of gravity and makes for an EXTREMELY FORGIVING OVERSIZE iron head. Improving play FOR GOLFERS OF ALL SKILL LEVELS. The LEFT HANDED ADOBE iron set has a new solid impact sole promoting smoother turf interaction on a wide variety of lies. Made from high strength stainless steel the ADOBE iron may be custom fit for all heights. DON'T MISS-OUT on this limited time promotional offer as these irons will not be available for long at this price.
CONDITION RATING: 10 (BRAND NEW)
You will receive a complete Custom assembled set of LEFT HANDED ADOBE Irons with 3 Easy Steps.
-STEP 1-
Choose your 8 clubs (Select 1 option):
-(3-4-5-6-7-8-9-PW)
-(4-5-6-7-8-9-PW-SW)
- LEFT HANDED ADOBE Irons will be Custom Fit for you with Tour Velvet grips and Precision steel shafts
-STEP 2-
Choose YOUR custom club length:
Determining wrist-to-floor measurement
To determine your wrist-to-floor measurement wear non golf shoes
and stand on a hard surface with your arms hanging relaxed at your
sides. Then have someone measure from the point where your hand
meets your wrist (as shown in the diagram below) to the floor.
With this measurement and your height, we will be able to determine
the correct club length for you.
The chart below helps you determine if you should have your clubs
altered from the standard size based on your height and wrist-to-floor
measurement. Note: Club length alterations given are in inches. For example, +1.75"
means that your clubs should be made to be 1.75" longer than standard
length. A -0.5" instructs us to build your clubs to be 0.5" shorter than
standard length. And a S means that the proper club length for you is
Standard. Use the Chart to determine how much longer or shorter
(than standard) your club length should be by finding where Your Height
and Wrist-to-Floor Measurements intersect:
Shaft flex, a measurement of how much a shaft will bend under a certain load,
is directly related to trajectory, distance and feel. The proper shaft flex for
your swing speed helps produce the optimal trajectory for your shots.
Flex Chart: Use the Charts below to determine the proper flex. The
charts below are for consistent carry yardages only (don't include roll).
Generally taller players require longer clubs and shorter players
require shorter clubs. In metal woods your skill level will dictate
the need for additional length. A shorter driver may increase
distance for a player who has difficulty making solid contact. Putter
length is based on a golfer's posture and hand position at
address. Use the chart below to determine the proper shaft length.
Grip size plays a significant role in the shape of every golfer's
shot. Use the chart below to determine the proper grip size
for the clubs. Too large a grip can limit the golfer's ability to
properly release the wrists through the impact area (
resulting in a block and/or fade), while too small a grip
can cause an early release (resulting in a pull and/or draw).
-STEP 3-
Please include with your PayPal payment your iron choice, flex choice, height and wrist to floor measurement & grip size.
For example:
Please send club specs:
Right handed;
Regular Flex;
4-SW;
my height is 5'8"
33" wrist to floor measurements.
Standard size grips
& our club builders will take care of the rest!!!
Our highly trained customer support team is ready to assist you! The new LEFT HANDED ADOBE Irons (CALLAWAY DIABLO EDGE CLONES) are designed with the mid to high handicapper in mind. These irons offer longer distance and greater control. The LEFT HANDED ADOBE irons have a generous cavity chamber increasing consistency and accuracy.
ADDED BONUS THIS WEEK!!!
FREE SPINE ALIGNMENT FOR YOUR ENTIRE CUSTOM SET!!!
How Much Does It Cost?
Answer: FREE WITH YOUR ORDER!!!
What is Spine Alignment? Answer: An independent study on spine aligning was undertaken by Golf Science Consultants, Inc. The study was performed by J. Howard Butler, President of Golf Science Consultants, Inc., and former vice-president of shaft technology at True Temper.
Preliminary test results clearly indicate that when the golf shaft is properly aligned the club becomes more stable, thus improving the impact repeatability (hitting the sweet spot more often).
In all golfers tested impact repeatability improved from 14 to 51% when changing from non-aligned to spine aligned clubs. In a separate article, Golf Digest reported on tests conducted by Dr. P. C. Chou of the Drexel University Ballistics Research Center, which revealed that a player loses about six yards for ever two-tenths 2/10 of an inch that they miss the sweet spot.
Nearly 240 Tour pros have spine aligned their clubs. "I believe there's something to spine-matching," says Ben Crenshaw. Want real life results? Check out Scott Verplank's record on the Tour through 1998, then look at his record in 1999 and 2000. He has his shafts aligned in 1999. "The bottom line ...is that if the spines are not set in the club heads at the proper angle in relation to the clubface, we are not getting the most out of our clubs and we will continue to have clubs that will perform differently than others. Did spining my clubs make a difference? It sure did. I'm hitting my 8-iron, 9-iron and wedge farther. I also noticed that I hit my woods straighter, and I don't hate my 6-iron anymore." Tom Stine, PGA Tour Partners Magazine, Sept/Oct
SKILL LEVEL CLASSIFICATION:
HANDICAP CLASS RANKING: 7-35HC
SPECIFICATIONS
<
| HEAD | #3 | #4 |
#5
| #6 | #7 | #8 | #9 | PW | AW | SW | LW | Tolerance | | LOFT |
20°
|
23°
|
26°
|
29°
|
33°
|
37°
|
41°
|
45°
|
50°
|
55°
|
60°
| ±1° | | LIE |
60.5°
|
61°
|
61.5°
|
62°
|
62.5°
|
63°
|
64°
|
65°
| 65° | 65° | 65° |
±1°
| | WEIGHT | 244g | 251g | 258g | 265g | 272g | 279g | 286g | 293g | 301g | 305g | 305g | ±3g | | OFFSET | 5.5mm | 4.5mm | 4.5mm | 3mm | 3mm | 3mm | 3mm | 3mm | 1mm | 1mm | 1mm | ±0.5mm | | BOUNCE |
1°
| 1° | 1° | 2° | 3° | 4° | 5° | 7° | 9° | 11° | 10° | ±1° | |
| 
