Full Flow Melt-blown Polypropylene Sediment Filter (6 pack)

The Full Flow Sediment Filter is often the first filter installed in the Whole House Water Filter circuit. It is often the first point of contact between your water supply and your home and is used as a pre-filtration unit before the water continues to reverse osmosis and activated carbon filters. It catches unwanted particles, including sand, dirt, silt, rust, and other fine particles as they attempt to enter your houses water system. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water.

The Full Flow filters are made of fine-melted polypropylene that are blown and spun into cylinder-like form. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, as well as household water appliances like boilers, refrigerators, ice-makers, and many more, to perform better for longer periods of time.

The Full Flow water filter has wider dimensions than standard water filters, allowing it to process more water in less time for your house.

SPECIFICATIONS

Full Flow 10-inch 1 Micron Sediment Water Filter - Used for effectively removing most sediments from water

This is a filter for pre-filtration of water and fits all 10 inch Full Flow Water Filter housings

Product Lifetime - 10,000 gallons - replace two or three times a year - depending on your water quality

This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations

Dimensions: 10 inches x 4.5 inches (24.4 cm x 11.43 cm) (Industry standard size for most in-house water filters)

6-pack of 1 Micron Full Flow Sediment Water Filters

Additional Details ------------------------------ Bullet point: Big Blue 10-inch 1 Micron Sediment Water Filter - Used for effectively removing most sediments from water|This is a filter for pre-filtration of water and fits all 10 inch Big Blue Water Filter housings and WELL-MATCHED Models of Cartridges: 3M 70020162437 American Plumber WDGD-5005 Fette Filter COMIN18JU061077 Aqua-Pure AP810 AP814 and AP811 Everpure DEV9108-44 9108-44 DGD-5005 Filter Specialist CMMF05975-45W1 4WH-HDGR-F01H Hydronix SDC-45-1005 Liquatec SDF-45-1005 Neo-Pure MB-45098-05 Pentair DGD-5005 9108-44 DEV9108-44 Pentek DGD-5005|Product Lifetime - 10 000 gallons - replace two or three times a year - depending on your water quality|This filter is wrapped and sealed. Dimensions: 10 inches x 4.5 inches (24.4 cm x 11.43 cm)|WELL-FIT FOLLOWING HOUSINGS: Pentek 150237 150469 153029 #10 BIG-CLEAR-LX-10 and A48249 Aqua Filter Plus 150237-INSTKIT BLUONICS BLBB20GAC BLBBC10 and BLBB10x2 iSpring HB18B OMNIFilter BF7-S-05 and BF7-S-S06 American Plumber W10-PR Watts W10FFPH1CBPR SimPure RSWHB001Z_S8 AB-WH10BBN Hydronix HX-HF45-10CLBK10 and HF45-10BLBK15 Geekpure BB-10T and BB-10B EcoPure EPWO4 Culligan HD-950A Aquaboon AB-WH10BB-1S10BB5M|WELL-MATCHED with RFC-BBSA W15-PR WFHD13001B GXWH35F GXWH30C HF45-10BLBK10PR and AP817 6-Pack|Big Blue 10-inch 1 Micron Sediment Water Filter - Used for effectively removing most sediments from water|This is a filter for pre-filtration of water and fits all 10 inch Big Blue Water Filter housings|Product Lifetime - 10 000 gallons - replace two or three times a year - depending on your water quality|This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations|Dimensions: 10 inches x 4.5 inches (24.4 cm x 11.43 cm) (Industry standard size for most in-house water filters)|6-pack of 1 Micron Big Blue Sediment Water Filters Product description: Full Flow Melt-blown Polypropylene Sediment Filter (6 pack)

The Full Flow Sediment Filter is often the first filter installed in the Whole House Water Filter circuit. It is often the first point of contact between your water supply and your home and is used as a pre-filtration unit before the water continues to reverse osmosis and activated carbon filters. It catches unwanted particles, including sand, dirt, silt, rust, and other fine particles as they attempt to enter your house’s water system. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water.

The Full Flow filters are made of fine-melted polypropylene that are blown and spun into cylinder-like form. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, as well as household water appliances like boilers, refrigerators, ice-makers, and many more, to perform better for longer periods of time.

The Full Flow water filter has wider dimensions than standard water filters, allowing it to process more water in less time for your house.

SPECIFICATIONS

Full Flow 10-inch 1 Micron Sediment Water Filter - Used for effectively removing most sediments from water

This is a filter for pre-filtration of water and fits all 10 inch Full Flow Water Filter housings

Product Lifetime - 10,000 gallons - replace two or three times a year - depending on your water quality

This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations

Dimensions: 10 inches x 4.5 inches (24.4 cm x 11.43 cm) (Industry standard size for most in-house water filters)

6-pack of 1 Micron Full Flow Sediment Water Filters