Features:

Specifications:

A) Operation Temperature: -20 °C -- 75 °C
B) Storage Temperature: -40 °C -- 120 °C
C) Power: 8V -- 24V

Contents:

• CD software
• USB cable
• BMW OBD2 Interface

Applicable system include:

DME,EGS,ABS,IHKA/IHKR,IKE/IKI/KOMBI,EML,SPM/SM,EWS, ZKE, GR,PDC,SZM,BIT,LSZ/LCM,LEW,RAD,EHC/EDC,BM,AIC,NAV,MFL,VID,SES,MID,SHD, SMF,SPMBT,SPMFT,VTG,CID,EPS,SBSL,SBSR,CVM,SIM,SMB,URS,RDC,VMX,VNC, EKM,DWA,XEN,FHK,GSA,AHK,ADS,CAS,DME,EGS,VTC,HPFI,ACC,ARS,CIM,DSC, EDC,EHC,EMF,RDC,AHL,AHM,AMP,ASK,SZM/BZM,FBZM,CD,CD-GW,SG-FD,SG-FD- GW,FD,CDC,CON,FCON,DWA,FBI,IHKA,FKA,HKL,JBIT,KHI,KOM,LM,DVD-C,NAV ,JNAV,PDC,CA,PM/MPM,RLS,SASL,SASR,SBSL,SBSR,SFZ,SSBF,SSFA,SSH,STVL ,STVR,SHD,SINE,SMFA,SMBF,SMFAH,SMBFH,SHZH,SVS,SZL,SEC,TEL,TCU,TMBF T,TMBFH,TMFAT,TMFAH,VM,WIM,ZGM,SIM,KBM,SBSL,SBSR,TMFA,TMBF,CID,AL ,JBE,MRS/ACSM,FRM,RLS,FZD,CCC-ANT,DDE,CCC-A,EKPS,GWS,VTG,VTC,VTC2, CCC-ASK,AL,EDCSHL,EDCSHR,EDCSVL,EDCSVR,VDM,ACSM,AMPH,AMPT,CA,CCC-BO, CCC-GW,CHAMP-BO,CHAMP-GW,CNAV,DAB,FD,FLA,FRM2,FZD,HUD,IBOC,IHKA,INS TR,JBE2,KHM,KNAV,M-ASK-BO,M-ASK-GW,RFK,RLSS,RSE,SDARS,SINE,ULF-SBX, ULF-SBX-H,VSW,EHC,ULF,IHKR,IHR,M-ASK-NAV,MRS,RAD2-BO,RAD2-GW,SDMRS, DME2,ACC2,ANT,ARS,BZM,CD,CEM,CIM2,LM2 AHL2,LM2,LM2,NVE,NVK,PM,SEC 2,SGM-SIM,SGM-ZGM,VTC2,ZBM,DSC,DSC,ALBBF,ALBFA,CIC,CIC-GW,IHKA2,KGM, SZL2,LDM,LRR,MPM,SMG,TLC,Integrate Chas Manag,Rol-mo dis,rear axle,ABS /ACS/DSC,AMP,IHKS,IHS,MJOY,AIRBAG,EWS.

Instructions on how to use 1.4.0 Scanner:

1. Run the software disc that comes with it (must be used with windows XP or older) Unzip the installer tool
2. Run the installer program and save it to your desk top.
3. Plug in the scanner using the provided USB cable into your computer
4. Your computer will recognize new hardware and search for drivers, it will not find any.
5. On your computer go to My computer then to the C drive then click on the folder marked BMW Scanner. Inside will be a folder marked drivers with a PDF telling you how to install them.
6. Once that is done you are ready to rock. Open the file on your desk top and it should say that the drivers are installed and give you the option to continue (dont click it continue yet).
7. Under the dash on the driver side is the access port. Open the latch and plug the scanner in.
8. Turn your car key to position 1
9. Click continue, it will tell you to turn the key (you already did that, no need to go past position 1) then press continue, click continue.
10. It will do a quick scan then it will tell you what car you drive and every single option that came with the car (neat huh?).
11. Next you will be greeted by this screen.
12. On the left click scan, it will run through every diagnostic and report back all errors. NOTE, it will not be able to connect to every singe one listed on all 3 pages, I have no idea why. But honestly I dont need to access them all so I didnt care.
13. Once it is done scanning it will tell you of any and all errors that have been stored. Double click on the line with the errors and it will let you access that section to see what is wrong and even erase the errors if they no longer exist.
14. Now, to change your features.
15. Double click on the ZKE line and a new window will pop up.
16. On the left will be a button marked coding. Click that, then click recoding. The window will change to another that will give you access to windows roll up and down, auto door locks and all sorts of other features.