CE Marking Directive Compliance ・EMC Directive : EN 60947-5-2

・RoHS Directive

・ISO 13849-1 (Category 1, PLc) (Note)

(Note) : Conformed from December 2021 production.

Sensing Range 500 mm 19.685 in

Min. Sensing Object ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in)

Hysteresis -

Repeatability (Perpendicular to Sensing Axis) 0.05 mm 0.002 in or less

Supply Voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less

Current Consumption Emitter: 10 mA or less

Receiver: 10 mA or less

Output PNP open-collector transistor

- Maximum source current: 50 mA

- Applied voltage: 30 V DC or less (between output and +V)

- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)

Output: Utilization Category DC-12 or DC-13

Output: Short-Circuit Protection Incorporated

Response Time 0.5 ms or less

Operation Indicator Orange LED (lights up when the output is ON)

Incident Beam Indicator -

Stability Indicator Green LED (lights up under stable light received condition or stable dark condition)

Pollution Degree 3 (Industrial environment)

Protection IP67 (IEC)

Ambient Temperature -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉

Ambient Humidity 35 to 85 % RH, Storage: 35 to 85 % RH

Ambient Illuminance Incandescent light: 3,000 lx or less at the light-receiving face

Voltage Withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure

Insulation Resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure

Vibration Resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each

Shock Resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each

Emitting Element Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)

Material Enclosure: Polyethylene terephthalate

Lens: Polyalylate

Cable 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long

Cable Extension Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).

(Note) : For safety applications, do not exceed 30 m 98.425 ft.

Weight (Typ.) Net weight (each emitter and receiver): 20 g approx

Gross weight: 50 g approx

Accessory Mounting screws: 1 set

Certification UL certification