All servers listed here have been booted all the way into Linux Mint and ran a few projects from Folding At Home Distributed Computing
Each listing for a individual server in this listing is typed up using the individual server.
Servers are SOLD AS IS
NO Rails NO Hard Drives NO Caddies NO Operating System or Software
Free Shipping Lower 48


INXI Printouts follow at end of listing

1) USE723N9J6 HP Proliant DL360 G5 Single Quad Core XEON E5345 2.33 GHz 6 GB no HD no Caddies (6 Bays)
  2 Embedded GB Ethernet Ports 1 Management Port iLO2 2 Power Supplies DVD-Rom and 2 Grille Bay Fillers and 2 Drive Bay Fillers

mint@mint:~$ sudo inxi -F -m -s
System:    Host: mint Kernel: 4.15.0-20-generic x86_64 bits: 64 Desktop: Cinnamon 4.0.8 Distro: Linux Mint 19.1 Tessa 
Machine:   Type: Server System: HP product: ProLiant DL360 G5 v: N/A serial: N/A 
           Mobo: N/A model: N/A serial: N/A BIOS: HP v: P58 date: 05/02/2011 
Memory:    RAM: total: 5.82 GiB used: 1.05 GiB (18.0%) 
           Array-1: capacity: 64 GiB slots: 8 EC: Single-bit ECC 
           Device-1: DIMM 1A size: 1 GiB speed: 667 MT/s 
           Device-2: DIMM 2C size: 1 GiB speed: 667 MT/s 
           Device-3: DIMM 3A size: 1 GiB speed: 667 MT/s 
           Device-4: DIMM 4C size: 1 GiB speed: 667 MT/s 
           Device-5: DIMM 5B size: 1 GiB speed: 667 MT/s 
           Device-6: DIMM 6D size: No Module Installed 
           Device-7: DIMM 7B size: 1 GiB speed: 667 MT/s 
           Device-8: DIMM 8D size: No Module Installed 
CPU:       Topology: Quad Core model: Intel Xeon E5345 bits: 64 type: MCP L2 cache: 4096 KiB 
           Speed: 2000 MHz min/max: N/A Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] ES1000 driver: radeon v: kernel 
           Display: server: X.Org 1.19.6 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1600x900~60Hz 
           OpenGL: renderer: llvmpipe (LLVM 6.0 128 bits) v: 3.3 Mesa 18.0.5 
Audio:     Message: No Device data found. 
Network:   Device-1: Broadcom Limited NetXtreme II BCM5708 Gigabit Ethernet driver: bnx2 
           IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: 00:1b:78:75:5d:36 
           Device-2: Broadcom Limited NetXtreme II BCM5708 Gigabit Ethernet driver: bnx2 
           IF: enp5s0 state: down mac: 00:1b:78:75:5d:2c 
Drives:    Local Storage: total: 14.59 GiB used: 106.1 MiB (0.7%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.59 GiB 
RAID:      Hardware-1: Hewlett-Packard Smart Array Controller driver: hpsa 
Partition: ID-1: / size: 2.91 GiB used: 106.1 MiB (3.6%) fs: overlay source: ERR-102 
Sensors:   System Temperatures: cpu: 52.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 170 Uptime: 32m Shell: bash inxi: 3.0.27