B2B - B2C Electronic Module Repair Solutions
Electronics Reverse Engineering Remanufacturing
Better Than New 5 Step Process?

BUYER SENDS THEIR MODULE TO US FOR REMANUFACTURING AND UPGRADING. NOT A SALE OF AN ACTUAL PART. READ CAREFULLY BEFORE CLICKING THE BUY BUTTON!

PHILIPS MODELS: 58PFL4609/F7 58PFL4909/F7 - POWER SUPPLY REBUILD and UPGRADE SERVICE

Board Numbers: 168P-P58EQF-W2, 168P-P58EQF-W0, 5800-P58EQF-WO20, 5800-P58EQF-WO30

Part Number: UPBPSPRGB001

Typical symptoms included: TV will not power-up; dead TV with or without the standby indicator lit; no picture or sound. The most common symptom/problem is intermittent power-up on this module. Once it is on it stays on, but may have to unplug and plug TV back in to get it to power-up until it gets worse and will not power-up at all.

This is a full function rebuild and upgrade; we fix all failures with this module including power surge. We warranty the whole module for 1-Year*, not just parts and labor like TV repair shops typically offer. We install improved and electronically overrated parts that exceed the original manufacture's design and replace good parts of inferior quality as well as the bad ones.

Let us get your electronic module up and running smoothly again or rather remake it "better than new" with our patent pending 'Better Than New 5 Step Process'?  © Midway Module. All rights reserved.

Parts repair kits being sold by parts sellers who know very little about electronic circuits are substituting parts incorrectly; all of these kits are missing important parts, contain incorrect non fusible parts, which may cause fire and smoke damage when they fail, have inferior quality knock-off parts, unnecessary parts, and are not upgrades of the originals, which do not duplicate our repair, revision and upgrade. We know this for a fact due to our customers sending us their modules  after failed repair attempts using these parts repair kits. This is like "the blind leading the blind". In addition, parts repair kits being sold will not solve the most common problem with this module; that is, the intermittent power-up problem, since the parts needed to solve this problem are not included in the kit. Positive feedback in frequently being left for these kits noting "fast shipping" prior to installation of the kit or after installation before the problem returns.

 

More importantly, a high level of soldering skill and equipment is required to replace parts on this fragile circuit board without damaging the copper lands and traces. What often happens is a novice installs all or some of the kit parts damaging the circuit board and introducing additional faults. Another common mistake is that all the kit parts are installed, but all the parts replaced were replacing good parts while missing the faulty part not included in the kit.

Electronics component level troubleshooting and repair is not based on this type of shotgun approach. It is not like paint-by-numbers, and will result in failure more than 90 % of the time causing disillusionment, frustration, time wasted, and money lost. In addition, you cannot learn electronics this way.

 

We have received these power supply modules from customers who told us they purchased it used and lasted only a few months or arrived D.O.A. due to the used module being salvaged from a broken screen TV. We recommend that you not make their same mistake by purchasing a used module. Let us repair and upgrade your original module. Without our upgrade -- all of these power supply modules will fail prematurely. Used power supply modules of this type for sale are cooked and ready to blow.

Turn-around time is currently 1-3 days.

After the rebuild is completed on your module we will install it into a television of the same make and model as yours. Then your module will be test played all night which is typically 12 hours. This is a necessary procedure to burn-in the new parts and to weed out any defects before sending your module back to you.

More importantly, we back your rebuilt-upgraded module with our Total Module 1-Year Warranty*, not just parts and labor within a single repair like TV repair shops typically offer. *Warranty excludes tinkering, intentional or unintentional, and acts of nature, but not limited to lightning damage, power surge, flood, spilled fluid, pet urine, and earthquake damage. Buyer is responsible for return warranty shipping. We reserve the right to mark your module for identification.

Here at Midway Module we have been rebuilding electronic devices of all types for over thirty-five years. In this period of time we have learned one simple rule - when new electronic products fail early they always fail for a reason. This reason can almost always be traced back to a flaw in the original design and causation is usually minor. A revision will prevent this failure from occurring again. Therefore, reverse engineering and circuit analysis become the crucial and primary step in our 'Better Than New 5 Step Process'?  © Midway Module. All rights reserved.
 
 Both of these 58" Philips models have an excellent energy efficient and solid design in 'The Netherlands', however assembly in China caused some inferior parts to find their way into this power supply and cause early failures. We will revise and upgrade your module to remove these inherent faults, so your power supply does not fail again.

In addition, we use the latest high-grade technologically advanced semiconductors and passive component parts in our module remanufacturing process, and replace defective low grade parts with American or Japanese designed industrial - military grade parts skillfully selected by our electronics engineer. Moreover, these parts are installed using our technologically advanced soldering and optical equipment for laser precision accuracy and quality of work.

We have all certified technicians to repair your module under the supervision of our electronics engineer who routs out the reason for early electronics circuit failures. After careful calculations a revision is given to the technician who implements the repair on your module so it will never fail for the same fault in design again. This translates into a worry-free experience between you and your customer. We back our work with a whole module 6-month warranty on every rebuild we do.

We must receive your circuit board (module) intact without damage from previous repairs or shipping. We refuse to pay shipping to return a module which has been damaged by previous repairs or shipping back to you if we deem it non repairable or it tests good. However, at our discretion we may decide to repair your module even if you have attempted a repair on it if the damage is manageable, however turn-around time may increase. Buyer is responsible for initial shipping cost of sending their module to us. If the preceding terms are met and we deem your module non repairable (very unlikely) we will refund your full purchase price and return your module to you at our shipping expense. Buyer agrees to the preceding terms by purchasing this service.

You will receive shipping instructions after checkout when your payment posts to comply with seller's rules.

We leave positive feedback for everyone after they do the same for us.

Thank you!

P.S. If you have a different power supply than the one listed above please send us your model number, so we can quote you a price.

All text in this listing is protected by copyright, 2016-2020 Midway Module
Plagiarizing (copying) sellers will be promptly reported.