Skyartec Butterfly S 4CH Rc Quadcopter With and similar items

The Butterfly is a multifunctional RC quadcopter that can be used as easily for stable aerial photography as it can for performing advanced stunts and tricks. With 4 brushless motors it has plenty of power while the 6 axis gyro makes it super stable. This is the new version with compass headlock function and PC calibration software. Description: The new compass feature makes flying the quadcopter much easier. Without this feature a quadcopter will be controlled like a helicopter whereby to go in a certain direction the helicopter must be rotated to face that direction and then you go forward. With the compass turned on it no longer matters which way the quadcopter is pointing, when you push forward on the transmitter the quadcopter will always move away from the take off position, and the same with the other directions regardless of which way it is pointing. The quadcopter comes fully built with everything needed to fly including the excellent Skyartec NASA701 7ch LCD transmitter. Featuring an advanced 6 axis gyro with auto correcting that supports fixed point hovering, and also PTZ link function makes aerial photography or FPV flying a pleasure. This quadcopter is crammed with cutting edge technology that puts it into a different league than the toy quadcopters. Check out the full feature list below. 6 AXIS FLIGHT CONTROL SYSTEM The adjustable gyroscope automatically adjusts the speeds of the rotors to keep the copter stable even in windy conditions. NEW COMPASS FEATURE Moves away from you when you push forward on the transmitter, no matter which way the copter is facing. DIMENSIONS This copter measures 267mm x 267mm x 100mm 7.4V 1300mAh LITHIUM POLYMER BATTERY High capacity battery provides longer flight time. ALL NEW 2.4GHz RADIO TRANSMITTER All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows multiple RC models to be used in the same area without interference. Specs Features: SKU KMC01-1 Manufacturer Skyartec Build RTF Radio Equipment 2.4 GHz Motor / Engine Brushless Blades Single Blade Channels 4 Ch Specifications Transmitter: NASA701 7Ch LCD 2.4Ghz Control Distance: 500m Receiver: SKY706 Camera Carry Weight: 80g Control system: Butteryfly flight control board ESC: 15AS x 4pcs Battery: 7.4V 1300mah Li-Po Charger: Balance charger with UK 12V power adapter Motor: 4 x 1804 2000KV brushless Size: 267mm x 267mm x 100mm Weight: 300g Features Fully built ready to fly Compass function for easier flight control Use of excellent quality components for stable and superior performance Use of 32 bit single chip 6 axis gyro - three axis acceleration sensor and three axis angular rate sensor Easy to use and debug 3 axis gyro sensitivity and the main function can be adjusted by the position adjuster Support for multi-axis X type Output ports have up to six groups, can drive ESC or servo Standard PWM signal output, supports conventional PWM ESC and all kinds of servos (digital or analog) The receiver can be directly connected to the flight control board without a special decoder Stable hovering and excellent handling (depends on a reasonable mix, commissioning and operational experience), the mode of operation is similar to an RC helicopter, but easier to adapt Can perform some incredible stunt flying Stable battery life for small scope aerial photography. Less complicated and expensive than using an RC helicopter Supports firmware upgrades (need to buy the programming module), for increasing and improving performance Self-stabilizing system, supports fixed-point hovering Can quickly eliminate the inertia caused by flight so is fast and stable Has aerial photo PTZ link function CAMP CAMR Required To Use 8 x AA batteries to use in radio transmitter MSRP: $360.00 code: ntrk