MOXA UC-8112-ME-T-LX-USW Industrial DIN-rail and similar items

This item is available for inspection or pickup Saturdays and Sundays in the used computer booth AKA usedcomputers org at Englishtown Auction Sales in Englishtown, NJ Please read the shipping message at the end of this listing. This listing is for a MOXA UC-8112-ME-T-LX-USW Industrial DIN-rail Computer With Cellular, Ethernet and Wi-Fi Interfaces. The lot includes The MOXA UC-8112-ME-T-LX-USW Mean Well DR-15-24 Power Supply, Input: 100-240VAC 0.88A, Output: 24VDC 0.63A A 6 inch Din Rail. A 16GB SD card that was blank when I installed. The Moxa will be shipped detached from the rail. It does not include the serial cable. Antennas are not included. This item was mounted is a housing the antennas where routed outside of the housing. It has been tested it powering on. After it powers up there is LED activity. As seen in the pictures. I connected it to a network with an Ethernet cable but it DOES NOT appears on my network. I was able to do a console connection, I will post the console screen at the end of this listing. I thought I did a factory reset by pressing the program button for 10 seconds, but when I enter what I think is the default user name and password it reports Login incorrect. I see one of the lines in the console report is " Starting US Water FDC application... [ OK ] Started US Water FDC application. " So I assume it was not factory reset. The item is in good cosmetic condition but these were used in an office they have some scratches and scrapes. The listing is for the items listed only NO other cords, cable's software or manuals The item is in good working condition. The item is in good cosmetic condition, but these were used in an office they have some scratches and scraps. These are retired business machines, I did a basic wipe down but they may need further cleaning. The listing is for the items listed only NO other cords, cable's software or manuals You can inspect this item or the buyer can pick it up Saturdays and Sundays 1:00 PM to 5:30 PM at the used computer booth at Englishtown Auction Sales in Englishtown, NJ. Its booth 69 in the blue building. usedcomputers org Use the ask the seller a question feature if you want to inspect the item. For directions to Englishtown Auction click on the directions link on the Englishtown Auction web page. The buyer can Pick up this item Saturdays and Sundays 1:00 PM to 5:30 PM after the listing ends. Make sure I know you are coming so I can make sure it is there not in storage. Please note long shipping lead time 5 Bussiness days on this item is because the item is stored at the location listed above that I usually only go to on weekends. See the notice it should give you an expected ship by date. I try to ship the following Monday or Tuesday after payment is received. If the item is purchased or paid for on a Sunday after I leave the shop or on a Monday or Tuesday, I may not be able to pick it up until the following weekend. It will be shipped as soon as possible. Console Screen Follows. CPU TYPE: 1GHz Press DEL To Enter BIOS configuration Setting: 0 Boot to MMC2: eMMC... mmc0 is current device ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux-4.1.0-ltsi-rt-uc8100-me+ Created: 2017-04-20 2:59:07 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4309104 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 Loading Kernel Image ... OK OK Loading Device Tree to 9fa0d000, end 9fa17d62 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-ltsi-rt-uc8100-me+ (root@weshuang) (gcc versi on 4.9.2 ( 4.9.2-10) ) #60 Thu Apr 20 10:57:38 CST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [ 0.000000] Machine model: MOXA UC8100-ME [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 129664 [ 0.000000] Kernel command line: mac=00:90:E8:66:1E:4A sd=0 ver=1.0.0S11 cons ole=ttyS0,115200n8 root=/dev/mmcblk1p2 rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 495280K/523264K available (3887K kernel code, 227K rwdata , 1748K rodata, 188K init, 242K bss, 11600K reserved, 16384K cma-reserved, 0K hi ghmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc0588dd8 (5636 kB) [ 0.000000] .init : 0xc0589000 - 0xc05b8000 ( 188 kB) [ 0.000000] .data : 0xc05b8000 - 0xc05f0e80 ( 228 kB) [ 0.000000] .bss : 0xc05f3000 - 0xc062f964 ( 243 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrup ts [ 0.000000] OMAP clockevent source: timer2 at 25000000 Hz [ 0.000011] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899 345900ns [ 0.000026] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_ idle_ns: 76450417870 ns [ 0.000035] OMAP clocksource: timer1 at 25000000 Hz [ 0.000239] Console: colour dummy device 80x30 [ 0.000268] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.089467] pid_max: default: 32768 minimum: 301 [ 0.089551] Security Framework initialized [ 0.089575] SELinux: Initializing. [ 0.089650] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089658] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090253] Initializing cgroup subsys blkio [ 0.090271] Initializing cgroup subsys memory [ 0.090305] Initializing cgroup subsys devices [ 0.090318] Initializing cgroup subsys freezer [ 0.090333] Initializing cgroup subsys net_cls [ 0.090343] Initializing cgroup subsys perf_event [ 0.090353] Initializing cgroup subsys net_prio [ 0.090374] CPU: Testing write buffer coherency: ok [ 0.090700] Setting up static identity map for 0x800081c0 - 0x8000820c [ 0.091864] devtmpfs: initialized [ 0.100656] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.106662] omap_hwmod: tptc0 using broken dt data from edma [ 0.106735] omap_hwmod: tptc1 using broken dt data from edma [ 0.106799] omap_hwmod: tptc2 using broken dt data from edma [ 0.110761] omap_hwmod: debugss: _wait_target_disable failed [ 0.152021] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max _idle_ns: 19112604462750000 ns [ 0.153769] pinctrl core: initialized pinctrl subsystem [ 0.154668] NET: Registered protocol family 16 [ 0.156454] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.157017] cpuidle: using governor ladder [ 0.157031] cpuidle: using governor menu [ 0.159270] OMAP GPIO hardware version 0.1 [ 0.165679] No ATAGs? [ 0.165702] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.177069] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.179202] SCSI subsystem initialized [ 0.179784] usbcore: registered new interface driver usbfs [ 0.179842] usbcore: registered new interface driver hub [ 0.179907] usbcore: registered new device driver usb [ 0.180223] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wk up@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.180260] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4_wk up@44c00000/scm@210000/pinmux@800/pinmux_i2c1_pins, deferring probe [ 0.181123] NetLabel: Initializing [ 0.181133] NetLabel: domain hash size = 128 [ 0.181137] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.181185] NetLabel: unlabeled traffic allowed by default [ 0.181351] Switched to clocksource timer1 [ 0.189249] NET: Registered protocol family 2 [ 0.190005] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.190046] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.190082] TCP: Hash tables configured (established 4096 bind 4096) [ 0.190152] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.190167] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.190323] NET: Registered protocol family 1 [ 0.190689] RPC: Registered named UNIX socket transport module. [ 0.190699] RPC: Registered udp transport module. [ 0.190704] RPC: Registered tcp transport module. [ 0.190709] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.191404] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 0.191434] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counter s available [ 0.192852] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.192921] audit: initializing netlink subsys (disabled) [ 0.192974] audit: type=2000 audit(0.180:1): initialized [ 0.193751] VFS: Disk quotas dquot_6.6.0 [ 0.193802] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.194235] NFS: Registering the id_resolver key type [ 0.194283] Key type id_resolver registered [ 0.194291] Key type id_legacy registered [ 0.194313] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.194558] fuse init (API version 7.23) [ 0.196230] io scheduler noop registered (default) [ 0.196245] io scheduler deadline registered [ 0.196312] io scheduler cfq registered [ 0.197084] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.197671] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.198907] console [ttyS0] disabled [ 0.198961] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a 8250 [ 0.821109] console [ttyS0] enabled [ 0.825203] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 155, base_baud = 3000000) is a 8250 [ 0.834545] 481aa000.serial: ttyS2 at MMIO 0x481aa000 (irq = 156, base_baud = 3000000) is a 8250 [ 0.844243] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 0.858834] brd: module loaded [ 0.866019] loop: module loaded [ 0.870887] m25p80 spi1.0: mx25l6405d (8192 Kbytes) [ 0.876284] 3 ofpart partitions found on MTD device spi1.0 [ 0.881824] Creating 3 MTD partitions on "spi1.0": [ 0.886651] 0x000000000000-0x000000080000 : "MLO" [ 0.892152] 0x000000080000-0x000000180000 : "U-Boot" [ 0.897762] 0x000000180000-0x0000001a0000 : "U-Boot Env" [ 0.904246] PPP generic driver version 2.4.2 [ 0.908718] PPP BSD Compression module registered [ 0.913478] PPP Deflate Compression module registered [ 0.918566] PPP MPPE Compression module registered [ 0.923393] NET: Registered protocol family 24 [ 0.928180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.934755] ehci-omap: OMAP-EHCI Host Controller driver [ 0.940066] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.952281] 47401300.usb-phy supply vcc not found, using dummy regulator [ 0.963444] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 0.969231] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1 [ 0.977286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.984123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 0.991382] usb usb1: Product: MUSB HDRC host driver [ 0.996365] usb usb1: Manufacturer: Linux 4.1.0-ltsi-rt-uc8100-me+ musb-hcd [ 1.003364] usb usb1: SerialNumber: musb-hdrc.0.auto [ 1.008931] hub 1-0:1.0: USB hub found [ 1.012750] hub 1-0:1.0: 1 port detected [ 1.017580] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 1.028707] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.034530] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2 [ 1.042629] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.049446] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.056713] usb usb2: Product: MUSB HDRC host driver [ 1.061704] usb usb2: Manufacturer: Linux 4.1.0-ltsi-rt-uc8100-me+ musb-hcd [ 1.068693] usb usb2: SerialNumber: musb-hdrc.1.auto [ 1.074252] hub 2-0:1.0: USB hub found [ 1.078037] hub 2-0:1.0: 1 port detected [ 1.082569] i2c /dev entries driver [ 1.086752] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.091468] omap_hsmmc 48060000.mmc: Got WP GPIO [ 1.170982] mmc0: new high speed SDHC card at address 59b4 [ 1.176949] ledtrig-cpu: registered to indicate activity on CPUs [ 1.183561] mmcblk0: mmc0:59b4 SD 29.4 GiB [ 1.188863] cryptodev: driver 1.7 loaded. [ 1.193037] mmcblk0: p1 [ 1.196030] oprofile: using arm/armv7 [ 1.200016] Initializing XFRM netlink socket [ 1.204777] NET: Registered protocol family 10 [ 1.213167] NET: Registered protocol family 17 [ 1.217718] NET: Registered protocol family 15 [ 1.222264] bridge: automatic filtering via arp/ip/ip6tables has been depreca ted. Update your scripts to load br_netfilter if you need this. [ 1.234997] Bridge firewalling registered [ 1.239132] Key type dns_resolver registered [ 1.243966] ThumbEE CPU extension supported. [ 1.271538] tps65910 0-002d: No interrupt support, no core IRQ [ 1.281406] vrtc: supplied by vbat [ 1.286352] vio: supplied by vbat [ 1.290999] mmc1: MAN_BKOPS_EN bit is not set [ 1.295466] vdd_mpu: supplied by vbat [ 1.300769] vdd_core: supplied by vbat [ 1.307203] vdig1: supplied by vbat [ 1.312003] vdig2: supplied by vbat [ 1.315540] mmc1: new high speed MMC card at address 0001 [ 1.321449] mmcblk1: mmc1:0001 P1XXXX 3.60 GiB [ 1.326180] mmcblk1boot0: mmc1:0001 P1XXXX partition 1 16.0 MiB [ 1.332305] mmcblk1boot1: mmc1:0001 P1XXXX partition 2 16.0 MiB [ 1.339486] vpll: supplied by vbat [ 1.342961] mmcblk1: p1 p2 p3 [ 1.347560] vdac: supplied by vbat [ 1.352875] vaux1: supplied by vbat [ 1.357635] vaux2: supplied by vbat [ 1.362410] vaux33: supplied by vbat [ 1.367240] vmmc_reg: supplied by vbat [ 1.372184] vbb: supplied by vbat [ 1.377115] rtc-ds1374 0-0068: rtc core: registered ds1374 as rtc0 [ 1.383370] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.401939] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 400 kHz [ 1.471371] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.477498] davinci_mdio 4a101000.mdio: detected phy mask ffffffcf [ 1.484976] libphy: 4a101000.mdio: probed [ 1.489011] davinci_mdio 4a101000.mdio: phy[4]: device 4a101000.mdio:04, driv er RealTek RTL8201FL [ 1.497951] davinci_mdio 4a101000.mdio: phy[5]: device 4a101000.mdio:05, driv er RealTek RTL8201FL [ 1.507353] cpsw 4a100000.ethernet: Detected MACID = 00:90:e8:66:1e:4a [ 1.514744] cpsw 4a100000.ethernet: cpsw: Detected MACID = 00:90:e8:66:1e:4b [ 1.523038] input: push_button as /devices/platform/push_button/input/input0 (description exceeds maximum possible length)