BIQU Panda CryoGrip Pro Frostbite Double-sided Build Plate 257x257mm for BambuLab P1P, P1S, X1C, X1E, A1 Achieve superior print adhesion with lower temperatures with the Cryogrip Pro Frostbite spring steel coated built plate. Suitable for 3D printers with a platform size of 257x257mm, like Bambu-Lab P1P, P1S, X1C, X1E, A1. Also fits Prusa MK3, MK3s, MK3s+, and MK4. Compatible with PLA and PETG. Has a textured build surface, which provides superior adhesion at lower temperatures. Special Surface Texture: The CryoGrip Pro Frostbite Build plate is sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The build plate is Impact resistant and Corrosion Resistant with a long life-span, and zero risk of repeated bending causing the coating to peel off. The surface is textured, and provides ultra strong adhesion, with a temperature range of only 30-50c for PLA, saving heating time, and with 50% power reduction. It can also be used for PETG filament at 50-70c. Unparalleled Adhesion: CryoGrip Pro Frostbite Build plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits warping, so there is no need to worry about print failure caused by the first layer breaking loose, greatly improving the print success rate. Designed to safely protect your printing at low temperatures. Enjoy perfect 3D printing without warping. Perfect Compatibility: CryoGrip Pro Glacier Build plate is suitable for 3D printers with a platform size of 257x257mm, for Bambu-Lab P1P, P1S, X1C, X1E, A1. Compatible with PLA and PETG. Easy to Remove: The printed model can be released without the need for other tools; After bending, the steel plate immediately returns to a flat state. After prolonged use, wiping with clean water only can easily restore the new adhesive effect. Do not use alcohols or acetone solvents.