MSC Tech LG 1480 Battery Charger (4 Slot ) Condition is used. The LG 1480 battery charger is a processor-controlled charger and tester for up to 4 batteries with built-in SMBus electronics. Any combination of Lithium-Ion (Li-Ion, 10.8 V) and Nickel Metal Hydride (NiMH, 12 V) batteries can be inserted. The charger communicates with the batteries via the SMBus. After the battery is inserted into the charger slot, the charger automatically checks whether the battery requires charging only or a complete test cycle (conditioning). The test cycle performs various charge and discharge cycles to measure and optimize the battery capacity, and recalibrate the SMBus electronics. When the test cycle is complete, the battery is ready to use. The status of the battery capacity is indicated by the Test-LED (please refer to the table on the next page). The test cycle can be started or stopped manually for any battery by pressing its respective key. Number of battery-cells Li-Ion : 3 battery-cells (10.8 V), NiMH : 10 battery-cells (12 V) Charging current Li-Ion : max. 3 A, NiMH : max. 2.5 A Charge / Discharge capacity : max. 150 VA / max. 50 VA Power supply : 100 - 240 VAC, 50 - 60 Hz, max. 2,3 A Operating conditions : temperature 0 - 35 C, humidity 20 - 90% RH, altitude 0 - 3000 m Storage conditions : temperature 0 - 60 C, humidity 10 - 95% RH, altitude 0 - 5000 m Dimensions : 80 x 313 x 261 mm (H x W x D) Weight : approx. 3.3 kg Complies with IEC/EN 60950:2001 and national deviations Australia, Canada and USA. CE mark to LVD and EMCD.