Security cylinder ?x6JM? ?Metalguard? FEATURES The cylinder has six locking pins points with reversible dimple key with built-in magnets. ?Metalguard? are registered trademark. Patented construction. Complies with the class 5 by EN 1303. 138 000 locking combinations. Anti-pick protection. Anti-drill protection. Anti-bump protection. Anti-snap protection (cut in the housing and the plug in a selected section, near to the outside of the housing), ensuring that the cylinder will continue to work even after improper breakage. The cylinder housing and plug are made of brass and satin (E) plated. Main row has 6 brass locking pins. Additional pins on the top row to increase the security of the locking. Pins anti-drilling is made of hardened steel and are before and after the weakened section for breakage. Built-in magnets in the key and a special pin in contact with them, increasing the security of the lock. A steel pin, blocking the cylinder when the key is removed and does not allowing work a key without a magnet. Pins anti-drilling is made of hardened steel and are before and after the weakened section for breakage. The CAM is made of sintered steel according BDS 6977-84 or DIN 18252. Four keys made of cupronickel. Fixing steel screw M5x55. BY CUSTOMER ORDER Extra cylinder can be manufactured by sample key. A cylinder can be manufactured with unlimited number of keys. The cylinder can be manufactured with length different from those indicated in the table and with a quantity of keys, which is the customer wants.